Rim Ringz™ is a set of four rings that come in a variety of sizes and colours and can be attached to the edge of a car’s alloy wheel. They are made from high quality plastic, durable and resistant to all weather conditions.
Car rims are typically an expensive and important design element of a car and scratching them or having chipped edges detracts from the look, and at the same time creates an expense for the owner.
Each size of Rim Ringz ™ is specially designed for specific rim size and it will perfectly fit your wheel. Rim Ringz ™ will take control of your rim’s durability, cut the cost of wheel repairs, make your wheels look better and bigger. It will even help you easily apply a tire shine on your tires.
The purpose of the product is to:
- Protect the wheel from “curb rash” while parking or turning sharply out of a driveway
- Cover existing damage
- Add visual appeal to the car.
RimRingz™ seeks to address the problem of “curb rash” on rims (scratches/scraping/chips).
RimRingz™ seeks to minimize the need of having the rims refinished by protecting the rims against scratches. Instead of fixing the rims, you can simply and easily cover scrape marks!
RimRingz™ gives you an opportunity to completely change the look and visual image of your car.
RimRingz™ looks like it naturally belongs on the rim. It gives a unique, sporty, luxurious and recognizable look to your car and your wheels.
RimRingz™ will make your wheels appear bigger and simply will make your car and wheels look superior.
|Dimensions||70 x 10 x 70 cm|
15", 16", 17", 18", 19", 20"
Black, Blue, Green, Red, Silver, White, Yellow
To install, you will need:installation-rr-1
Follow the instructions that accompany your jack and lift one tire
of your car with the jack.
Release all the air from the tire.
Align Rim Ringz™ with the edge of the rim, push the tire back with your fingers and press the hooks over the edge of the rim.
Insert all the hooks halfway in while pushing the tire inwards.
After all the hooks have been inserted halfway in, insert all the hooks 3/4 way in.
The general idea is to slowly insert all the hooks in, making sure that Rim Ringz™ is not crooked and that it stays parallel to the wheel. The point is for the tire to snap over the hooks so that the little teeth “grab” the tire from the inside.
Pushing the tire in, while pushing the hooks in helps the installation process. By doing this, a bigger opening will be created between the tire and the rim, and the hooks will enter that area more easily.
The individual hooks should all snap over the wheel edge perfectly. Make sure that all the hooks are also uniformly affixed. If they are not, you will have to repeat the installation process.
Re-inflate the tire to the manufacturer’s recommended tire pressure.
If you notice that some of the hooks are not perfectly positioned, you will have to release the air and re-do the process to make sure all the hooks are uniformly and perfectly placed.
Return the car to ground level and repeat the procedure for each remaining wheel.
NOTE Do not use a hammer on the Rim Ringz™ product. The pressure of your hands should be sufficient to snap the hooks of the Rim Ringz™ onto the rim. If your wheel has a balancing weight that is clipped on the outside edge of the rim, you will need to remove it so that the Rim Ringz™ can be properly attached. Either re-attach the weight to the opposite side of the rim’s edge or use a “stick-on” type weight. Should you have any installation questions, or you feel that you may be unable to perform the installation, we recommend that you talk to your local auto mechanic or tire specialist/store.
CAUTION TIRE PRESSURE MUST BE SET IN ACCORDANCE WITH THE MANUFACTURER’S RECOMMENDED TIRE PRESSURE.
When properly installed and used in normal driving conditions, Rim Ringz™ will help prevent and/or reduce damage to the edges of your car’s alloy wheels caused by scraping against curbs while parking. Although our products carry a full money-back guarantee, Rolla™ provides NO guarantee against damage caused to wheels by collision with a curb or any other object.
Cleaning substances containing acids may discolor the Rim Ringz™ and therefore should be avoided.